Karma Morgan Series User Manual page 71

CAUTION
Ensure the hex head shoulder bolt is installed at the correct position when installing the seat.
Use Loctite 243 when installing the bolt.
CAUTION
When installing a captain seat, the hex head shoulder bolt is installed at position A. (Figure
5.3.19-13)
CAUTION
When installing a sling seat, the hex head shoulder bolt is installed at position B. (Figure
5.3.19-14)
Figure 5.3.19-13
Put the rear part of the seat assembly on the interface plate. (Figure 5.3.19-15)
Figure 5.3.19-15
Push the seat backwards and ensure the fixing pins on the interface plate are properly seated in the slots
under the seat frame. (Figure 5.3.19-16)
Use part F to fix seat frame. Make sure the two screws are properly tightened. (Figure 5.3.16-17)
Figure 5.3.19-14
Figure 5.3.19-16
71