Karma Morgan Series User Manual page 47

Figure 5.3.3-8 Figure 5.3.3-9 Figure 5.3.3-10
Center Mount Legrest Assembly
When adjusting the footplate upwards or downwards for the needs of the user, use the #6 Allen Key
Wrench to loosen the bolt. (Figure 5.3.4-1) After adjusting the footplate, re-tighten the bolt.
When adjusting the footplate inwards or outwards for the needs of the user, use the #17 box end Wrench
to loosen the nut. (Figure 5.3.4-2) and use the #5 Allen Key Wrench to adjust the bolt.
Flip the footplate over to check whether it is located at appropriate angle. The adjustable range is between
0° and 15°. After adjusting the footplate, re-tighten the nut.
When adjusting the whole footplate assembly angle for the needs of the user, use the #5 Allen Key Wrench
to loosen the bolts on both sides. (Figure 5.3.4-3) The adjustable angle is-5°, 0°, 5°, 10° and 15°. Ensure the
footplate assembly does not interfere with other parts. The adjustable angle also dependents upon the
type of the seat.
Adjusting the Calf Pad
When adjusting the calf pad upwards, downwards, forwards or backwards, use the #5 Allen Key Wrench to
loosen the four bolts on both sides. (Figure 5.3.4-4) After adjusting the calf pad to the appropriate position,
re-tighten the bolts.
When adjusting the calf pad leftwards or rightwards, use the #4 Allen Key Wrench to loosen the bolts.
(Figure 5.3.4-5) After adjusting the calf pad to the appropriate position, re-tighten the bolts.
.
CAUTION
When adjusting the footrest or footplate, ensure the user's feet are appropriately supported.
47