Karma Morgan Series User Manual page 83

The Morgan chassis has dedicated holes in the chassis where the Dahl Docking plate can be mounted on.
1. Tilt the Morgan Chassis and check the holes for the mounting plates.
2. Mount the Dahl adapter plate in to the chassis using the 7 bolts and nuts which comes with the
mounting set. Tighten the bolts firmly
3. Now take the Dahl spacer (Dahl part no: 500673, docking plate (Dahl part no: 500561 and 5 special Dahl
high grade steel (14.9) Torx bolts (Dahl part no: 502800) to mount the Dahl docking plate on to the Morgan
chassis.
WARNING
The special Dahl high grade Torx bolts (Dahl part no: 502800) only come in one length which
often is too long. They need to be cut into the right light by the authorized engineer to fit the
locking plate properly without damaging the batteries.
dedicated holes for mounting Dahl mounting plate
83