Karma Morgan Series User Manual page 84

4. After cutting the bolts to the right length, Loctite 222 needs to be added on to the thread to secure the
bolts.
5. the five Torx bolts shall be tightened with a torque wrench to the preset torque of 16-18 Nm.
6. place the batteries back into the chassis and connect them to the electronics.
Now the Morgan chassis is ready to be docked into the Dahl Docking station.
The mounting of the Dahl docking station into your vehicle shall only be executed by an authorized car
adaptation company. They will get the right support and information from Dahl Engineering how to mount
the docking station in to the designated vehicle.
WARNING
The Dahl Docking station is only allowed to build in to a vehicle by trained and authorized staff
of a registered car adaptation company. For ordering the Dahl Docking and its accessories,
please contact Dahl Engineering in Denmark for further details. You can find Dahl at
www.dahlengineering.dk
mounting the Dahl docking plate on to the Morgan chassis
Dahl docking kit
84