Karma Morgan Series User Manual page 61

Figure 5.3.11-6 Figure 5.3.11-7
Morgan with KISS Seat：
Adjustable head support is shown as Figure 5.3.11-8 and Figure 5.3.11-9.
Contour head support is shown as Figure 5.3.11-10 and Figure 5.3.11-11.
Use the #4 Allen Key Wrench to loosen the screws behind the head support. Adjust the headrest leftwards
or rightwards to the desired position. (Figure 5.3.11-12)
The head support can be removed by turning and loosening the lever A. ( Figure 5.3.11-13) When installing
the head support back to the back support, be sure the pin B is in alignment with the slot C. (Figure 5.3.11-
14, Figure 5.3.11-15) Turn and tighten the lever A.
Use the #3 Allen Key Wrench to loosen the screw D. The head support can be rotated or moved up or down.
(Figure 5.3.11-16)
Press the lever E. The head support can be folded. (Figure 5.3.11-17)
By turning and loosening the lever F, the head support can be moved forwards or backwards.
(Figure 5.3.11-18)
Use the #5 Allen Key Wrench to loosen the screw G. The head support pad can be adjusted.
(Figure 5.3.11.19)
Unzip the cover of the head support pad. Use the #5 Allen Key Wrench to loosen the screw H. The width of
head support can be adjusted. (Figure 5.3.11-20)
Figure 5.3.11-8 Figure 5.3.11-9 Figure 5.3.11-10
61