Karma Morgan Series User Manual page 45

Figure 5.3.2-1 Figure 5.3.2-2
For KISS seat
Please use the #5 Allen Key Wrench to make this adjustment. Remove the screws under the seat (Figure
5.3.2-3) then adjust the footrest to accommodate the user's leg position and flexibility (Figure 5.3.2-4).
Re-tighten the screws.5.3.2.2.2 The procedures to adjust the powered footrest are the same as those
described on 5.3.2.2.1. Make sure the cable is properly routed and fastened after adjusting the footrest.
(Figure 5.3.2-5)
Figure 5.3.2-3 Figure 5.3.2-4 Figure 5.3.2-5
Footplates Adjustment
The footplate length should be adjusted according to the user's calf length. Go to your service provider for
adjustment or follow below instructions:
Standard Footplate
Use the #13 box end Wrench to loosen the bolt at the side of the footplate. Adjust the footplate height and
re-tighten the bolt. (Figure 5.3.3-1)
Figure 5.3.3-1
45