Karma Morgan Series User Manual page 49

Figure 5.3.5-3
Figure 5.3.5-6
Flip back armrest assembly
The flip Back armrest assembly of KISS seat is shown as Figure 5.3.6-1
Press the spring button and flip the armrest back. (Figure 5.3.6-1)
When adjusting the whole armrest assembly upwards or downwards, use the #4 Allen Key Wrench and the
#10 box end Wrench to loosen the screw used to fixing the armrest bracket. (Figure 5.3.6-2)
When adjusting the armrest pad upwards or downwards, use the #4 Allen key wrench to loosen the screw
used to fixing the armrest frame. (Figure 5.3.6-3)
When adjusting the whole armrest pad assembly forwards or backwards, use the #4 Allen Key Wrench to
loosen the screw used to fixing the armrest adjustable frame. The total range of adjustment is 5cm ,in
increments of 2.5 cm. (Figure 5.3.6-4)
When adjusting the armrest pad forwards or backwards, use the #3 Allen key wrench to loosen the screw
used to fixing the armrest pad. The total range of adjustment is 5cm, in increments of 2.5 cm.
(Figure 5.3.6-5).
In order to keep the armrest pad horizontal, the flip back armrest assembly might need to be adjusted
together with the backrest angle according to table 6-1 and table 6-2. (Figure 5.3.6-7) When adjusting the
angle of the flip back armrest, use the #4 Allen key wrench to loosen the screws used to fixing the
adjustable plate. (Figure 5.3.6-6).
Figure 5.3.5-4
Figure 5.3.5-7
Figure 5.3.5-5
49