AXIOMTEK CEM700 User Manual page 35

TM
CEM700 COM Express Type 7 Basic Module
 Hardware Monitor
This screen is for fan speed control and hardware health status monitoring.
This screen displays the temperature of system and CPU, cooling fans speed in RPM and
system voltages (VBAT, +3.3V, +3.3V_SBY and +5V).
Smart Fan Mode Select
Set Smart Fan mode. The default is Auto Mode. If Smart Fan is in Auto Mode, the system
fan spins at different speed depending on system temperature; the higher the temperature,
the faster the system fan spins. If Smart Fan is in Manual Mode, user can manually
change system fan speed to 0%, 25%, 50%, 75% or 100% (see images below).
AMI BIOS Setup Utility 29