Table of Contents
Advertisement
CEM700 COM Express
Serial Port 1 Configuration
Serial Port 1 (UART1)
Enable or disable serial port 1. The optimal setting for base I/O address is 248h and for
interrupt request address is IRQ7.
Serial Port 2 Configuration
Serial Port 2 (UART2)
Enable or disable serial port 2. The optimal setting for base I/O address is 258h and for
interrupt request address is IRQ6.
28
TM
Type 7 Basic Module
AMI BIOS Setup Utility
Advertisement
Table of Contents
Need help?
Do you have a question about the CEM700 and is the answer not in the manual?