Installation And Removal Of Exhaust Hose - Sharp CV-P12PX Installation And Operation Manual

INSTALLATION AND REMOVAL OF EXHAUST HOSE

Installation of the exhaust hose
(CV-P12PX, CV-P13PX)
1
Attach the exhaust hose adapters A
and B to the exhaust hose.
Extend both ends of the exhaust hose
and insert them into the exhaust hose
adapters A and B respectively, and turn
them until they stop. Make sure they are
securely attached.
2
Attach the exhaust hose adapter B to
the unit.
Insert the two projections on the exhaust
hose adapter B into the two holes on
the unit, and firmly attach them to each
other.
3
Attach the exhaust hose.
Insert the exhaust hose adapter A to the
window exhaust adapter in the window
panel and turn it to lock it in place.
The exhaust hose should be as short as possible for operational efficiency; however,
it must not be twisted or bent.
Unacceptable
Exhaust hose adapter A
Acceptable
E-18
Exhaust hose
adapter A
Exhaust hose
Exhaust hose adapter B
Projection
Hole
Window exhaust
adapter
Acceptable