Sharp CV-P12PX Installation And Operation Manual page 22

INSTALLATION AND REMOVAL OF EXHAUST HOSE
NOTICE:
If the dual-duct type unit is used as single-duct type one, please refer to the follow-
ing instructions:
1
Attach the grille and the cover to the
unit.
Open the baffle and remove it. Insert
the 2 projections on the grille into the 2
holes on the back plate of the unit, and
close the grille.
Insert the two projections on the cover
into the two holes on the unit,
2
Install one exhaust hose.
Hole
E-20
Cover
Projection
Grille
Projection
Baffle