Installation And Removal Of Exhaust Hose - Sharp CV-P09FR Installation And Operation Manual

INSTALLATION AND REMOVAL OF EXHAUST HOSE

The exhaust hose must be installed or removed in accordance with the usage mode.
Mode
COOL, FAN, VENTILATION
DEHUMIDIFICATION
Installation of the exhaust hose
1
Attach the insect guard net to the ex-
haust adapter.
Push the insect guard net firmly to ensure
that four projections on the exhaust adapter
fit into the four holes on it.
2
Attach the Exhaust adapter to the
exhaust hose.
Extend one end of the exhaust hose and
insert it into the Exhaust adapter, and turn
it (approx. three times) until it stops.
Make sure they are securely attached
afterwards.
3
Attach the exhaust hose adapter to
the unit.
Insert the two projections on the exhaust
hose adapter into the two holes on the unit,
and firmly attach them to each other.
4
Lead the exhaust hose outdoors
Suction disk may be used to keep window
or door closed.
The exhaust hose should be as short as possible for operational efficiency;
however, it must not be twisted or bent.
Unacceptable
Removal of the exhaust hose
1
Remove the exhaust hose adapter from
the unit.
Lift up and remove the exhaust hose adapter
from the unit by pushing down on the two
projections.
Exhaust hose
Install
Remove
Suction disk
Acceptable
E-8
Projection
Exhaust adapter
Extend
Exhaust hose
Projection
Hole
Acceptable
Hole
Insent guard net
Projection