SiUS181305E
2.2.2 BRC7E830
Relations
The following modes can be selected by using the INSPECTION/TEST button on the remote
Between Modes
controller.
Indoor unit settings can be made.
Filter cleaning sign time
Others
Following codes can be checked.
Error codes
Indoor model code
Service Check
To find the error code, proceed as follows:
Function
Troubleshooting
Press the INSPECTION/TEST
button for more than 4 seconds.
Field
setting
mode
Press the INSPECTION/TEST
button for more than 4 seconds.
Press the INSPECTION/TEST
button once.
Inspection
mode
Press the INSPECTION/TEST button once.
Step
Action
Press the INSPECTION/TEST button to enter the inspection mode. Then the figure 0 blinks
1
on the UNIT No. display.
Service data can be obtained.
Service
mode
Service settings can be made.
Press the INSPECTION/TEST button once.
Normal
mode
Press the INSPECTION/TEST button once or leave the
remote controller untouched for 30 minutes.
After 10 seconds
Test
operation
mode
INSPECTION/TEST button
Service Check Function
Error code history
Temperature data of various sections
Forced fan ON
Airflow rate setting
Thermostat is forcibly turned on.
(R15367)
(R14392)
150