ProSoft Technology ILX800-SMSG User Manual page 28

Contents
User Manual
Request
UPTIME
OUTPUTx
WHITELIST
3.3.2 Commands to Execute Some Action
Note: If, for some reason, you do not want the module to send out acknowledge (response) text messages for
the following text message commands, you can set the CONFIG_ackEnabled variable to FALSE.
Command
OUTPUTx ON
OUTPUTx OFF
WHITELIST ON
WHITELIST OFF
ADD xxxxxxxxxx
DELETE xxxxxxxxxx
Page 28 of 39
Action by ILX800-SMSG
Returns text message with the
controller's running time
Important: The controller's clock
resets after approximately 20
days.
Returns text message with the
status of controller output x
Returns text message indicating
whether the Whitelist is enabled or
disabled
Action by ILX800-SMSG
Energizes controller output x
De-energizes controller output x
Enables Whitelist filtering
Disables Whitelist filtering
Writes a phone number to the fifth
element of the Receiver List array
Note: Any phone number stored
in the fifth element of the Receiver
List array will be overwritten by
this command.
Deletes phone number from the
Receiver List
ILX800-SMSG ♦ Micro800 Platform
SMS Text Plug-in Module for GSM Networks
Response from ILX800-SMSG
"Controller UP Time **NOTE Controller clock
resets after 20 days**: xxdxxhxxmxxsxxx"
"OUTPUTx ON"
"OUTPUTx OFF"
"WHITELIST ON"
"WHITELIST OFF"
Response from ILX800-SMSG
"OK: Set OUTPUTx=ON"
"OK: Set OUTPUTx=OFF"
"OK: Set ENABLEWL=ON"
"OK: Set ENABLEWL=OFF"
"OK: xxxxxxxxxx added"
"OK: xxxxxxxxxx deleted"
ProSoft Technology, Inc.
August 24, 2016