ProSoft Technology ILX800-SMSG User Manual page 27

ILX800-SMSG ♦ Micro800 Platform
SMS Text Plug-in Module for GSM Networks
3.3 Text Message Commands
The sample controller program for the ILX800-SMSG plug-in module recognizes the text
message commands listed in the following two tables. When the module receives a text
message command, it sends a response text message to the originator of the text message
command.
There are two types of text message commands.
3.3.1 Status Information Requests
Request
PLCSTATUS
NETSTATUS
MSGSTATUS
ProSoft Technology, Inc.
August 24, 2016
Action by ILX800-SMSG
Returns text message with
controller status data
Returns text message with cellular
network status data
Returns text message with
message counts
Response from ILX800-SMSG

Controller mode

Status of outputs and inputs

Signal strength in dBm

Network status

Number of carrier connection failures

Number of received messages

Number of sent messages

Number of failed sent messages

Number of messages received from
phone numbers not on the Whitelist
Contents
User Manual
Page 27 of 39