Advertisement
Ensure fuselage orthogonality before glue dried.
Install the 2 pcs 2mm carbon rod using No.502 glue
as shown picture above. Make sure the carbon rod
touch the 2pcs carbon strips.
Make sure both side unification.
Install arm on servo and electrify all servos to make
sure the arm perpendicular to servo. Then assemble
Quick rod adjuster and install it on arm, apply a little
No.502 on the nuts.
Install hinge into the hole on aileron with No.502 glue.
Install servo into the hole on wing using hot glue sticks.
4
Advertisement
