7.1
Tools
Note
The use of different types and different thicknesses of steel
♦
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
The welding units (inverters) and body tools authorised by
♦
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
7.2
Removing
– Release adhesive joint -1- between lock reinforcing, C-pillar
reinforcing and wheel housing liner.
– Separate original joint between lock reinforcing and rear door
aperture.
Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
7. Renewing C-pillar reinforcement (Variant)
303