Foam Treating Roof Side Member - Volkswagen Passat 2011 Body Repair Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
– Weld in B-pillar parting cut, MIG solder seam or SG continuous
weld seam are permitted.
Note
Both weld symbols are shown in the figure.
– Weld roof side member to door apertures, RP spot weld seam
(inverter).
5.4

Foam treating roof side member

5.4.1 Treating with foam
– Heat 2K structural foam cartridge in an approx. 60 °C water
bath for 20 minutes.
166
Rep. gr.51 - Body - centre