Installing - Volkswagen Passat 2011 Body Repair Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
– Remove remaining material.
– Remove remaining adhesive completely and grind bonded
surface back to bare metal.
– Clean any dust and grease off flange area on wheel arch.
14.3

Installing

Note
Only welding units authorised by Volkswagen AG may be used
⇒ page 230 .
Note
MIG solder seams or SG continuous weld seams are permitted at the parting cuts shown in the illustration.
232
Rep. gr.51 - Body - centre