Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
1.3.2
Adjusting roof depth
Note
The securing belts -1- prevent the roof lifting off the roof frame or shifting during the adhesion process.
♦
Securing belts must not be tightened too tightly in order to avoid damage.
♦
Dimension -a- can be set by tightening and loosening tensioning belts, adjusts position roof relative to side
♦
parts/panels.
Use setting gauge -3371- to check dimension -a-.
♦
– In areas shown, tension securing belts -T10038- transversely
over roof to vary height of roof.
– Secure roof in front and rear window apertures using vice-grip
pliers.
– Check line of roof versus roof side members.
♦ Dimension -a- = 4.0 ± 0.5 mm
– If necessary for compensation purposes, place pieces of felt
-533 867 910 B- on roof frame.
98
Rep. gr.51 - Body - centre