Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
11.3.3
Welding in
Note
New part must be welded in within 90 minutes or adhesion of
♦
adhesive will be impaired.
When applying 2K body adhesive -D 180 KD3 A2- , do not
♦
apply in area of SG plug weld seam for lock reinforcement.
Adhesive must be cleaned from threads for fastening striker
♦
after bonding in.
Before starting welding on right-hand side panel, apply 2K
♦
polyurethane adhesive -D 180 KD2 A1- in area of fuel filler
neck.
– Apply 2K body adhesive -D 180 KD3 A2- in the areas indica‐
ted.
338
Rep. gr.53 - Body - rear