– Cut first step of static mixer -D- off to achieve corresponding
bead cross-section.
– Carefully operate double cartridge gun -VAS 5237- without
static mixer until adhesive is discharged uniformly from both
chambers of cartridge connector.
– Screw static mixer onto cartridge connector.
– Apply the first 100 mm of adhesive to a piece of cardboard and
only then begin to apply the adhesive to the vehicle.
– Fill area -1- with 2K body adhesive -D 180 KD3 A2- using
double cartridge gun -VAS 5237- .
Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
2. Renewing roof - vehicles with sliding/tilting sunroof
119