Volkswagen Passat 2011 Body Repair Manual page 105

1.3.3 Bonding roof
– Remove roof.
– Apply corrosion protection measures according to guidelines
in ⇒ Paint workshop manual: Corrosion and corrosion pro‐
tection, attached and welded parts, materials .
– Lightly sand down bonding areas on left and right roof side
members.
– Clean adhesive surfaces on roof and vehicle with silicone re‐
mover -LSE 020 100 A3- .
Note
The adhesive must be applied very quickly.
♦
Always observe the application time (pot life).
♦
Use pneumatic or electric cartridge guns to apply adhesive.
♦
– Cut approx. 2 mm off nozzle -B- to provide appropriate bead
geometry.
Note
For this repair, it is absolutely necessary to work with great care
to prevent faults during processing.
Passat 2011 ➤ , Passat Variant 2011 ➤
Body Repairs - Edition 04.2011
99
1. Renewing roof