Line/Load Connection; X9 Terminal Strip - Siemens SINAMICS S120 Equipment Manual

Line Modules
3.4 Active Line Modules
3.4.3.3

Line/load connection

Table 3- 25 Line/load connection of the Active Line Module
Terminals
U1, V1, W1
3 AC power input
DCPA, DCNA
Connection for Braking
Module
DCP, DCN
DC power output
PE connection
PE1, PE2
3.4.3.4

X9 terminal strip

Table 3- 26 X9 terminal strip
Terminal
1
2
3
4
5
6
L1
L2
Max. connectable cross-section: Terminals 1 – 6: 1.5 mm
124
Technical specifications
Voltage:
3-ph. 380 V AC -10 % (-15 % < 1 min) to 3-ph. 480 V AC +10 %
•
3-ph. 500 V AC -10 % (-15 % < 1 min) to 3-ph. 690 V AC +10 %
•
Frequency: 47 Hz to 63 Hz
Connecting thread:
Frame sizes FX / GX: M10 / 25 Nm for ring cable lugs to DIN 46234
•
Frame sizes HX / JX: M12 / 50 Nm for ring cable lugs to DIN 46234
•
Voltage:
570 V to 720 V DC
•
750 V to 1035 V DC
•
Connections:
Frame sizes FX / GX: Threaded bolt M6 / 6 Nm for ring cable lugs to DIN 46234
•
Frame sizes HX / JX: d = 13 mm (M12/50 Nm) flat connector for busbar
•
Voltage:
570 V to 720 V DC
•
750 V to 1035 V DC
•
Connections:
Frame sizes FX / GX: Thread M10 / 25 Nm for ring cable lugs to DIN 46234
•
Frame sizes HX / JX: d = 13 mm (M12/50 Nm) flat connector for busbar
•
Connecting thread:
Frame sizes FX / GX: M10 / 25 Nm for ring cable lugs to DIN 46234
•
Frame sizes HX / JX: M12 / 50 Nm for ring cable lugs to DIN 46234
•
Signal name
P24V
M
Bridging contactor control
Precharging contactor control
Connection for fan supply
(frames sizes HX and JX only)
Technical specifications
Voltage: 24 V DC (20.4 V – 28.8 V)
Power consumption: max. 1.7 A
for Active Interface Module, X609:11
for Active Interface Module, X609:12
for Active Interface Module, X609:9
for Active Interface Module, X609:10
380 V to 480 V AC / 500 V to 690 V AC
Power consumption: See technical specifications
, Terminals L1 - L2: 35 mm
2
Manual, (GH3), 10/2008, 6SL3097-2AE00-0BP3
2
Chassis power units