Socket Cordless Hand Scanner User Manual page 9

Status Indicator LED
LED LED Activity
1 blink per second
Bluetooth
Status
(Blue) 1 blink per 5 seconds
Good Read
Green
(Green)
1 blink per second
Battery
Status
Solid red
(Red)
Off when connected
to charger
Status Indicator Beeps
The scanner beeps to signal the Bluetooth connection status. Optionally,
you can also set the scanner to beep every time it successfully scans data
and transmits it to the host device.
LED Beep Pattern
1 beep
Bluetooth
Status
(Blue)
2 beeps
Good Read
1 beep
(Green)
Touch Screen Stylus
The touch screen stylus in the tail of the CHS can be removed with small
pliers if desired. Visit the Socket website to purchase replacement styli.
WARNING: Do not use the stylus if damaged. A damaged
stylus may scratch the display screen of your computer.
The stylus does not work with XP Tablet computers using
Active Matrix displays.
CHAPTER 1: INTRODUCTION
Meaning
Bluetooth radio is on, but not
connected.
Bluetooth radio is on, connection
established.
Data successfully scanned and
transmitted to host device.
Less than 20% of battery life
remaining.
Batteries are charging.
Batteries are fully charged.
Meaning
Connection to host device has begun.
Connection to host device has ended.
Data was successfully scanned and
transmitted to host device.
9