Step 5: Connect Scanner To Computer Via Bluetooth - Socket Cordless Hand Scanner User Manual

Socket user's guide cordless hand scanner

Table of Contents

STEP 5: Connect Scanner to Computer via Bluetooth

The very first time you connect the CHS to your computer, you must

manually connect via your Bluetooth software. Afterwards, you will be

able to connect directly from SocketScan by right-clicking on the

SocketScan icon and selecting Connect CHS. If desired, you can also

configure the devices to automatically connect whenever within range.

1. Turn on the Cordless Hand Scanner. Press the small power button for

five seconds, until you see the LED turn blue. The LED should blink

blue once every second to show that the Bluetooth radio is on but not

connected. If the LED begins blinking red, the battery needs to be

recharged.

For more information about the LEDs and beeps, please

refer to page 9.

CHAPTER 4: SETUP FOR WINDOWS XP

Table of Contents

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?