Step 5: Connect Scanner To Pda Via Bluetooth - Socket Cordless Hand Scanner User Manual

Socket user's guide cordless hand scanner

Table of Contents

STEP 5: Connect Scanner to PDA via Bluetooth

1. Turn on the Cordless Hand Scanner. Press the

small power button for five seconds, until you

see the LED turn blue. The LED should blink blue

once every second to show that the Bluetooth radio

is on but not connected. If the LED begins

blinking red, the battery needs to be recharged.

2. Start SocketScan. Tap Home. In the upper right corner, make sure All is

selected. Scroll down and tap on the SocketScan icon.

3. The main screen of SocketScan will appear, showing a picture of the

Socket SDIO In-Hand Scan Card. In the Scanner Device drop-down

menu, select Bluetooth CHS.

4. The screen will display a picture of the Cordless Hand Scanner. In the

Device is field, tap Enabled.

CHAPTER 3: SETUP FOR PALM

Table of Contents

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?