Step 2: Charge The Scanner; Step 3: Uninstall Other Scanning Software - Socket Cordless Hand Scanner User Manual

Socket user's guide cordless hand scanner

Table of Contents

STEP 2: Charge the Scanner

Use the included AC adapter to charge the Cordless Hand Scanner. The

scanner's NiMH batteries must be charged for at least 4 hours before the

first use. The Battery Status LED will emit a solid red light while charging,

and turn off when the batteries are fully charged.

WARNING: Do not attempt to charge alkaline batteries —

this may cause alkaline batteries to leak and damage the

CHS.

The red Battery Status LED will not function properly if

standard AAA alkaline batteries are being used.

Delete any bar code scanning software already on your computer.

1. Make sure the bar code scanning software is closed.

2. Click Start | Control Panel | Add or Remove Programs.

3. Select the bar code scanning software and click Remove.

4. Follow the instructions on your screen to remove the software.

Table of Contents

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?