Setup For Palm; Setup Summary; Step 1: Install Batteries And Attach Tether - Socket Cordless Hand Scanner User Manual

Socket user's guide cordless hand scanner

Table of Contents

This chapter explains how to install and use the Cordless Hand Scanner

(CHS) with a Bluetooth enabled device running Palm OS 5.2 or later.

STEP 2: Charge the scanner.

STEP 3: Uninstall other scanning software.

STEP 4: Install the software.

STEP 5: Connect scanner to PDA via Bluetooth.

STEP 6: Scan data into your application.

OPTIONAL:

• Configure scan settings.

• Select symbologies.

• Test bar codes.

For help using SocketScan, tap on the

any screen.

STEP 1: Install Batteries and Attach Tether

1. Use a coin or screwdriver to unlock and remove the battery cover. Turn

the lock underneath the scanner to a horizontal position. Remove the

casing.

2. Install the batteries in opposite directions, as indicated by the positive

symbols.

WARNING: Do not install the batteries incorrectly.

Damage may result.

3. If desired, attach the tether. Wrap the string loop around the inside part

of the lock.

4. Replace the battery cover and lock it into place.

5. If desired, attach the tether to a lanyard or belt.

CHAPTER 3: SETUP FOR PALM

3 | Setup for Palm

button on the top of

Table of Contents

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?