Step 7: Scan Data Into Your Application - Socket Cordless Hand Scanner User Manual

Socket user's guide cordless hand scanner

Table of Contents

STEP 7: Scan Data into Your Application

1. Start the Windows application that you want to receive the data (e.g.,

Excel, Notepad, etc.). Make sure a document or spreadsheet is open.

2. Press the trigger button and scan the code. For example, try this bar

code:

When data is read and transmitted to the host, the laser will turn off.

Depending on the settings you chose in the SocketScanXP settings, the

scanner may beep and/or the LED may flash green.

If the Scanner fails to read data within a few seconds, the laser will turn

off, and you must try again.

Table of Contents

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?