Appendix D Enabling Or Disabling; D | Enabling Or Disabling Symbologies - Socket Cordless Hand Scanner User Manual

Appendix D Enabling or Disabling

The Cordless Hand Scanner is pre-set to automatically detect and decode
(auto-discriminate) the most common bar code symbologies. To enable or
disable symbologies, simply use SocketScan's Symbology Selector.
Notes:
• The length of some symbologies will change after Symbology Selector is
used. See Table 1.
• With more symbologies enabled, the scanner must work harder to search
through all the possible combinations. This may make the decoding process
slightly longer.
• The advanced symbology parameters listed in Table 2 can only be modified
by using the SocketScan Advanced Programming Guide or the SocketScan
SDK. Check Socket's website for updates.
Symbology
UPC/EAN/JAN
UPC-A
UPC-E
UPC-E1
EAN-8
EAN-13
Code 128 (USS-128 & UCC/EAN 128)
Code 39*
Code 39
Trioptic Code 39
Code 39 Full ASCII
Code 93
Interleaved 2 of 5*
Discrete 2 of 5*
Codabar
MSI Plessey*
RSS-14 (Standard, Limited, Expanded)**
*Warning: Setting the length to "Any" may lead to inaccurate decodes of these symbologies.
**This symbology will be added in the next release.
APPENDIX D: ENABLING/DISABLING SYMBOLOGIES
Symbologies
Table 1. Default Symbologies
Scanner
Default
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Default Length after
Length Symbology Selector
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Any Any
2 to 23 2 to 55
2 to 23 2 to 55
2 to 23 2 to 55
2 to 38 2 to 55
14 Only 2 to 55
12 Only 2 to 55
5 to 55 2 to 55
1 to 30 2 to 55
N/A N/A
65