Socket Cordless Hand Scanner User Manual page 20

Socket user's guide cordless hand scanner

Table of Contents

7. Your device will automatically connect to the CHS. If a passkey is

requested, enter 1234. To indicate the connection, the CHS will

beep once, and the SocketScan icon will change to show an image

of the scanner.

If the Pocket PC suspends or the CHS is taken out of range, the

Bluetooth connection will be lost. After the Pocket PC comes out

of suspend mode or returns within range, SocketScan will try to

re-establish the connection every 10 seconds for 30 seconds .

For more information about the meanings of LEDs and beeps,

please see page 9.

Note: If you are using the

Socket SDIO or CF card, the

Socket Bluetooth icon in the

task tray will also begin

blinking to indicate that the

devices have connected.

Table of Contents

Need help?

Do you have a question about the Cordless Hand Scanner and is the answer not in the manual?