Order Specification; Pvg 32 Order Specification; Reordering - Danfoss PVG 32 Technical Information

Technical Information
PVG 32 Proportional Valve Group

Order Specification

PVG 32 order specification

64 | © Danfoss | November 2017
The form can be obtained from the Danfoss Sales Organization. An order form for PVG 32 hydraulic valve
is shown on the page PVG 32 specification sheet
previous pages and the order form are divided into fields 0, 1-14, 15, 16, 17, a, b, c, e, f.
Each module has its own field:
0 Inlet section including:
1-14 Work section including:
15
16 Painting
Please state:
•
Required code numbers of all modules
•
Required setting (P) for pump side module
•
Required setting of LS
A/B

Reordering

The space at the top right-hand corner of the form is for Danfoss to fill in. The code number for the whole
of the specified valve group (PVG No.) is entered here.
In the event of a repeat order all you have to do is enter the number Danfoss has given on the initial
confirmation of order.
on page 66. Both the module selection chart on the
•
Pump side module PVP
•
Plug for external pilot oil supply PVPC
•
Electrical LS unloading valve PVPX
a: Mechanical actuator, PVM (or PVE when option mounted)
b: Shock/suction valve, PVLP and suction valve, PVLA
c:
•
Cover for mechanical actuation, PVMD
•
Cover for hydraulic actuation, PVH
•
Electrical actuators, PVE (or PVM when option mounted)
e: Main spool PVBS
f: Basic module, PVB
End plate, PVS
Assembly kit, PVAS
pressure limiting valves, see pressure setting guidance below.
BC00000038en-US0803