12
Setting up the sewing computer
Winding the bobbin
Winding the bobbin
turn power switch on
•
place empty bobbin on
•
spindle
Note:
When winding the bobbin
on the vertical spool holder
(p. 15), it may be necessary to
adjust the speed.
following the direction of the arrow take thread through the rear
•
guide and round the pre-tension stud
wind it several times round the empty bobbin
•
press the engaging lever against the bobbin
•
press the foot control
•
the motor will stop automatically when the bobbin is full
•
remove the bobbin
•
030529.52.04_0303_a135 a145_EN
Thread cutter
cut the thread on the thread
•
cutter