Sewing Table - Bernina ACTIVA 135 S User Manual

Sewing table

Free-Hand-System (FHS) presser foot lifter* (knee-operated)
Increases the sewing surface.
To attach
raise the needle and presser
•
foot
place the table over the free
•
arm and press firmly so that it
engages on the fixing cam
Attaching the presser foot
lifter
Insert into the opening in the
base plate: you should be able
to operate the lifter with your
knee in your normal sitting
position.
Note:
Your dealer can adjust it if
necessary.
030529.52.04_0303_a135 a145_EN
Setting up the sewing computer
To remove
raise the needle and presser
•
foot
pull the table out of the
•
fixing cam
pull in horizontal position to
•
the left
Scale
«0» corresponds to the centre
•
needle position
The presser foot lifter raises
and lowers the presser foot
push to the right
•
the presser foot is raised
•
the feed-dog is lowered
•
simultaneously
the feed-dog is raised as soon
•
as the first stitch is sewn
Seam guide
insert into the groove (under-
•
side of table) from the right or
left
it can be freely adjusted over
•
the whole width of the table
Note: Remove the presser
foot when attaching the seam
guide!
* Special accessory can vary from
country to country
11