Bobbin Thread; Winding The Bobbin - Bernina Q 20 User Manual

Setting up the machine

2.7 Bobbin thread

Winding the bobbin

> Place the empty bobbin on the spool axis such that the BERNINA label on the bobbin is not visible.
> Place the spool on the right spool pin.
> Insert the thread first in the eyelet positioned vertically above the spool and then in the right rear eyelet
of the thread guide.
> Guide the thread once around the thread pre-tension (1) in a counterclockwise direction.
> Wind the thread clockwise three or four times around the empty bobbin.
> Pull the excess thread over the thread cutter at the lever (2) and cut.
2
1
31