18
Setting up the sewing computer
Bringing up the lower thread
Thread cutter
hold the upper thread
•
sew one stitch
•
pull the upper thread until the bobbin thread appears
•
in the stitch plate hole
pull bobbin thread out of the hole and insert both
•
threads through the slit in the presser foot towards the back
pull threads over the cutter
•
pull both threads from front to back over the
•
cutter
the threads release as soon as the first stitch is
•
sewn
030529.52.04_0303_a135 a145_EN
Note:
The bobbin thread must be
brought up through the stitch
plate for certain types of
work. The length of thread
is sufficient for most normal
work if the lower thread
cutter has been used.