Assembling; Mounting The Device On A Din Rail - Siemens 3TK2810-1 System Manual

Safety relays, safety-related speed monitor, industrial controls

Hide thumbs Also See for 3TK2810-1:

Table of Contents

Assembling

4.1

Requirements

● At the installation location, a horizontal 35 mm mounting rail in accordance with

DIN EN 60715 is properly secured

● Please observe the information about the mounting position in Chapter "Technical data

(Page 63)".

DIN rail mounting procedure

Step

3TK2810-1 safety-related speed monitor

System Manual, 01/2011, 926246402000 DS 02

Operating instruction

Hang the back of the device onto the upper edge

of the DIN rail

Press the lower half of the device against the DIN

rail until the device engages

Figure

Table of Contents