Denon DN-X1600 Service Manual page 5

DISASSEMBLY
• Disassemble in order of the arrow of the figure of following flow.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling" it.
• If wire bundles are untied or moved to perform adjustment or parts replacement etc., be sure to rearrange them neatly
as they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
TOP PANEL UNIT
Refer to "DISASSEMBLY
2.TOP PANEL UNIT"
and "EXPLODED VIEW"
PANEL1 UNIT
(Ref. No. of EXPLODED VIEW : B-1)
EFFECT UNIT
(Ref. No. of EXPLODED VIEW : F)
SPLIT UNIT
(Ref. No. of EXPLODED VIEW : B-2)
TOP CHASSIS SUB ASSY
Refer to "DISASSEMBLY
1.TOP CHASSIS SUB ASSY"
and "EXPLODED VIEW"
INPUT UNIT
Refer to "DISASSEMBLY
3. INPUT UNIT"
and "EXPLODED VIEW"
INPUT UNIT
(Ref. No. of EXPLODED VIEW : D)
OUTPUT UNIT, MAIN UNIT
Refer to "DISASSEMBLY
4. OUTPUT UNIT, MAIN UNIT"
and "EXPLODED VIEW"
OUTPUT UNIT
(Ref. No. of EXPLODED VIEW : E-1)
MAIN UNIT
(Ref. No. of EXPLODED VIEW : F)
5
FADER UNIT
Refer to "DISASSEMBLY
5. FADER UNIT"
and "EXPLODED VIEW"
CH FADER UNIT
(Ref. No. of EXPLODED VIEW : C-3
FLAX FADER UNIT
(Ref. No. of EXPLODED VIEW : 55)
HP UNIT
Refer to "DISASSEMBLY
6. HP UNIT"
and "EXPLODED VIEW"
HP UNIT
(Ref. No. of EXPLODED VIEW :C-2)
MIC UNIT
Refer to "DISASSEMBLY
7. MIC UNIT"
and "EXPLODED VIEW"
MIC UNIT
(Ref. No. of EXPLODED VIEW : E-2)
AC INPUT UNIT
Refer to "DISASSEMBLY
8. AC INPUT UNIT"
and "EXPLODED VIEW"
AC INPUT UNIT
(Ref. No. of EXPLODED VIEW : A-1)
POWER UNIT
Refer to "DISASSEMBLY
9. POEWR UNIT"
and "EXPLODED VIEW"
POWER UNIT
(Ref. No. of EXPLODED VIEW : A-2)
6)
～