INVT iMars Operation Manual page 50

iMars grid-tied solar inverters
Setting item
Setup Cash
Setup
Date/Time
Language
Select
Country
Setup mode
LCD display
S e t u p C a s h
T y p e : E U R E U R
V a l / k W h : 0 0 . 5 0 € / 1 k W h
S e t u p D a t e / T i m e
D a t e : 2 0 1 2 / 0 1 / 1 5
1
T i m e : 1 2 : 1 4 : 3 0
Curr. Language : English
English Dutch
Chinese
German
Country : Australia
Germany Greece
England Denmark
Australia Holland
S e t u p M o d e l : I n d e p e n d
I n d e p e n d
P a r a l l e l
Enter into the interface and edit the
currency type and cash through "
" ". And then press "ENT" again to the
next line. After editing the four bits,
press "ENT" to save the edition and
press "ESC" to exit.
The currency types include EUR, POD,
CNY and USD.
Enter into the interface and edit the date
and time through "
press "ENT" again to the next line. After
editing the four bits, press "ENT" to save
the edition and press "ESC" to exit.，
Enter into the interface and edit the
language through "
then press "ENT" again to save the
edition and press "ESC" to exit.
The default language is English.
Enter into the interface and select
country through "
press "ENT" again to save the edition
and press "ESC" to exit.
The DC input mode includes
"independent" and "parallel":
"independent mode" is the independent
MPPT of Track A and Track B; "parallel
mode" is the parallel MPPT of Track A
and Track B.
The default mode is "independent".
The input mode setting is invisible if the
inverter is in power generation. It is only
available during DC power on and AC
power off.
Press " " or "
mode and press "ENT" to save the
setting or "ESC" to return.
If the situation of section 5.4.8 occurs, it
is necessary to switch the DC input to
"parallel" mode.
48
Display panel
Instruction
" or " ". And then
" or " ". And
" or " ". And then
" to select the setting
" or