Cause Of Failure Of Baking Oven; Nameplate - MKN OPEHEV4EB Operating Instructions Manual

8.1.2 Cause of failure of baking oven

Failure
The unit does not heat up
Insufficient heat output
The Heating indicator light does
not illuminate

8.2 Nameplate

Possible causes
The unit is switched off
Temperature control knob in
" " position
Power supply interrupted
Temperature control knob or heating
element is defective
Temperature control knob or heating
element is defective
Mains phase missing
The Heating indicator light is defective
When contacting Customer service, please always provide the
following data from the nameplate:
Serial number
(SN)
Type number
(TYP)
Operating instructions
Troubleshooting
Remedy
• Switch on the unit.
• Set the temperature.
• Contact the authorized technical person-
nel.
• Disconnect the unit from the electric
mains.
• Notify Customer service.
• Disconnect the unit from the electric
mains.
• Notify Customer service.
• Contact technical personnel.
• Disconnect the unit from the electric
mains.
• Contact the authorized technical person-
nel.
31