Setting the Clock
Setting the Date
Setting the Time
Programming Site Data
CLOCK
Use the
submenu to enter the current date and time. While
following the programming instructions, refer to the menu map in
Figure A-3 on page A-3.
1. To enter the
CLOCK
submenu, press
prompt.
2. The first prompt displays the programmed Date.
•
If the displayed date is correct, press
step 2.
•
If the displayed date is incorrect, press
date, and complete the steps below.
a. Enter the current year and press
to 99.
b. Use the [←], [→] and
c. Enter the current day and press
to the number of days in the current month.
3. The next prompt displays the programmed Time.
•
If the displayed time is correct, press
GLOBL
prompt.
•
If the displayed time is incorrect, press
time, and complete the steps below.
a. Press
[F1] = AM
or
[ENT]
press
. The allowable range is 1 to 12.
Note: A time of 12 PM represents Noon and a time of 12 AM
represents Midnight.
b. Enter the current Minutes and press
is 0 to 59.
4. Enter the current Seconds and press
0 to 59.
[F1]
at the
[F1] = OK
[F2] = EDIT
[ENT]
. The allowable range is 0
[F1]-[F4]
keys to select the current month.
[ENT]
. The allowable range is 1
[F1] = OK
[F2] = EDIT
[F2]
PM
=
. Then enter the current Hour and
[ENT]
. The allowable range
[ENT]
. The allowable range is
March 2008
Global PROGRAM
and proceed to
to change the
to return to the
to change the
1-29