Editing Meter Properties - GE DigitalFlow GS868 Programming Manual

Editing Meter Properties

Programming with PanaView
Through PanaView, you can edit the properties of your GS868. You
can:
•
Set the meter clock, or synchronize it with the PC clock
•
Read, plot and save transducer signals
•
Clear totalizers
•
Save site files to the meter or PC
•
Clear sites from the meter
•
Print site files to the PC
To edit the properties of your GS868:
1. Highlight the meter (as shown in Figure C-6 on page C-6).
2. Open the "Edit" menu and select the "Properties" option, as
shown in Figure C-8 below.
Figure C-8: The Properties Option in the Edit Menu
March 2008
C-7