GE DigitalFlow GS868 Programming Manual page 23

Procedure Options
Programming Site Data
After completing the above steps, the meter returns to the
PROGRAM
prompt. Continue as follows:
•
To continue programming the meter, refer to the menu maps in
Appendix A of the Programming Manual and navigate to the
desired menu. Then, proceed to the appropriate section of the
manual for instructions.
•
To leave the User Program and retain the previous settings,
[EXIT]
press twice and then press
Any programming changes will be discarded and you will be
returned to the data display.
•
To leave the User Program and return to measurement mode,
[EXIT]
press twice and then press
Your programming changes will be entered into the meter's
memory, and you will be returned to the data display.
March 2008
Channel
[F1] = NO
at the SAVE prompt.
[F2] = YES
at the SAVE prompt.
1-15