GE DigitalFlow GS868 Programming Manual page 71

Graphical Format (cont.)
Displaying Data
In the typical graphical display shown, the first logged parameter
is shown to the left of the y-axis and there is a message line below the
graph that initially indicates the starting date and time of the current
page. Notice that most of the locator bar has been replaced by a status
line in standard video that shows the value, units and time of the
record at the current cursor location. However, there is still an inverse
video pointer at the far right of this line to indicate that additional
option bar choices are available.
Note: The date in the message line includes only the day and the
month (not the year), and the times in the status line and the
message line include only the hours and minutes (not the
seconds).
Because the times displayed in the
only, movement of the cursor may not result in a visible change in the
posted times. For example, if a
been programmed, two presses of either cursor movement key will be
required to change the displayed time by one minute.
LOG
graph are in whole minutes
TIME INCREMENT
of 30 seconds has
March 2008
(VEL)
2-11