Care And Maintenance - Sharp FP-G50Y Operation Manual

CARE AND MAINTENANCE

To maintain optimum performance of this air purifi er, please clean the unit including the fi lter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
BACK PANEL
Back Panel
NOTE
UNIT
SENSOR
OM_FP-G50Y_EN.indd Sec1:8 OM_FP-G50Y_EN.indd Sec1:8
(Pre-fi lter)
How to clean hard to remove dirt
Back Panel
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
•Do not use volatile fl uids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
•Do not use detergents
Detergent ingredients may damage the unit.
1. Remove the Back Panel.
2. Remove the Dust Sensor Filter.
3. If it is very dirty, wash it with water and dry it
thoroughly.
Dust sensor
fi lter
Gently remove dust from the back panel,
using a vacuum cleaner attachment or
similar tool.
CAUTION
Do not apply excessive pressure, when
scrubbing the back panel.
1. Add a small amount of kitchen detergent
to water and soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean
water.
3. Completely dry the fi lter in a well-
ventilated area.
E-8
9/6/2559 BE 14:01 9/6/2559 BE 14:01