Care And Maintenance - Sharp UA-KCP100U-W Operation Manual

Function
Wi-Fi connection
with a router
(without the WPS
Button)
- AP (Access Point)
mode -

CARE AND MAINTENANCE

CARE
• To maintain optimum performance of this air
purifier, please clean the product including the
filter periodically.
• Be sure to stop operation
and unplug the product
before any maintenance or
replacing accessories.
3
1
Place
1
Humidifying Filter / Humidifying Tray
2
Back Panel / Sensor Filter
3
Main Body
4
HEPA Filter / Deodorizing Filter
1.
Select " " by following the Steps 1 - 3 on page 14.
2.
Perform Wi-Fi connection of the air purifier and the router based
on the App screen.
Refer to the App for further operations.
" " and " " blinks while setting the connection between the product
and the router.
weak
Once connected, receiver level will be displayed.
A connection error is occuring if "
and try again.
2
4
2
Page
19
20
20
21
EN-18
Setting
Light up
strong
" is displayed. Please confirm the router
FILTER MAINTENANCE
INDICATOR
When the cumulative operation period or the water
containing period is more than approximately 720
hours, the Filter Maintenance Indicator will turn on.
• It will not calculate the time when the product is
unplugged.
• 30 days × 24 hours = 720 hours
This is a reminder to perform the maintenance
described Humidifying Filter and Tray, Main Body,
Back Panel, and Sensors.
After maintenance, connect the power plug to the
wall outlet and press Power ON/OFF Button, then
press and hold the Filter Reset Button for 3 seconds
to reset the Filter Maintenance Indicator.
♪
Press for 3 sec.
Goes off