Grizzly T28366 Owner's Manual page 27

5. Rotate retractable blade guards out of
way, and remove blade flange and blade
(see Figure 33).
Note: Blade flange and blade need to be
moved slightly to the left to clear pins on
blade arbor (see Figure 33).
6.
Slide blade onto blade arbor and rotate until
pins (see Figure 33) align with holes in blade,
then push blade against blade arbor.
Blade
Flange
Blade
Pin
(1 of 2)
Blade
Arbor
Figure 33. Blade flange and blade removed and
blade arbor exposed.
Model T28366 (Mfd. Since 04/18)
7. Slide blade flange onto blade arbor and
rotate until arbor pins (see Figure 34) align
with holes in flange, then push flange against
blade.
8. Tighten arbor cap screw (see Figure 34).
It has left-hand threads and tightens when
turned counterclockwise.
Blade
Cap
Screw
Cap
Screw
Blade
Flange
Blade
Figure 34. Blade order of installation.
9.
Attach retaining ring to retractable guard hub.
10. Lower blade guard and reconnect blade
guard linkage.
Blade
Flange
Blade
Arbor
Blade
Arbor
-25-