Table of Contents
Advertisement
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine.
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
Description
•
Additional People ....................................... 1
•
Safety Glasses (Per Person) ...................... 1
•
Leather Gloves (Per Person) ...............1 Pair
•
Cleaner/Degreaser (Page 13) .... As Needed
•
Disposable Shop Rags ............... As Needed
•
Lifting Straps (Rated Min. 250 lbs.) ............ 2
•
Flat Head Screwdriver #2 ........................... 1
•
Adjustable Wrench ..................................... 1
•
Open-End Wrench 12mm ........................... 1
•
Hex Wrench 8mm ....................................... 1
•
Hex Wrench 5mm ....................................... 1
•
Retaining Ring Pliers .................................. 1
•
T28368 Cold Saw Blade (Not Included) .... 1
-12-
SECTION 3: SETUP
Qty
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (Figure 5)
A. Saw Assembly ........................................... 1
B. Vise Handwheel Handles ........................... 4
C. Lever Arm w/Hex Nut M22-2.5
and Flat Washer 22mm .............................. 1
D. Miter Lock Lever ......................................... 1
E. Eye Bolts 28mm, M12-1.75 x 22 ................. 4
B
C
Figure 5. T28366 inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Model T28366 (Mfd. Since 04/18)
Qty
A
E
D
Advertisement
Table of Contents
