Table of Contents
Advertisement
165
T28366
166
AMPUTATION
HAZARD!
Keep hands
away from
moving blades!
REF PART #
DESCRIPTION
163
PT28366163
BIOHAZARD LABEL
164
PT28366164
UNPLUG LABEL
165
PT28366165
MODEL NUMBER LABEL
166
PT28366166
BLADE FINGERS LABEL
167
PT28366167
ELECTRICITY LABEL
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
Model T28366 (Mfd. Since 04/18)
Labels & Cosmetics
163
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use proper PPE when
handling coolant.
Immediately clean up
spills.
171
EYE INJURY
HAZARD!
Always wear safety
glasses when using
this machine.
164
167
168
grizzly.com
169
T28366 Specifications
Motor: 1 HP, 115V, 1-Ph, 60 Hz, 8.5A
Motor Speed: 3360 RPM
Blade Speed: 68 RPM
Blade Size: 10" (250mm)
Arbor Size: 32mm
Angle Cuts: 0˚–45˚ L/R
Maximum Cutting Capacities:
@90˚: Round: 2-1/2", Square: 2-3/8"
@45˚: Round: 2-1/8", Square: 2"
Weight: 143 lbs.
REF PART #
DESCRIPTION
168
PT28366168
GRIZZLY.COM LABEL
169
PT28366169
READ MANUAL LABEL
170
PT28366170
MACHINE ID LABEL
171
PT28366171
EYE PROTECTION LABEL
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
170
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before
9. Always use a brush or vacuum to remove metal
operating.
chips; DO NOT use your hands, rags, or
2. Always wear approved safety glasses AND face
compressed air.
shield.
10. DO NOT operate near flammables.
3. Only plug power cord into a grounded outlet.
11. Wear proper protective equipment and follow all
4. Disconnect power before changing blades,
applicable regulations when disposing of
adjusting, or servicing.
coolant.
5. Tie back long hair, roll up sleeves, and DO NOT
12. Never leave machine running unattended.
wear loose clothing, gloves, or jewelry.
13. DO NOT operate under influence of drugs or
6. Keep all guards and covers in place during
alcohol, or when tired.
operation.
14. DO NOT expose to rain or operate in a wet
7. Never touch moving blade. Always keep hands out
environment.
of cutting path.
15. Prevent unauthorized use by children or
8. Never use hands alone to secure workpiece during
untrained users; restrict access or disable
operation. Always use clamps or a vise.
machine when unattended.
-45-
Advertisement
Table of Contents
